Polyacrylic Acid (PAA)
  Polyacrylic Acid Sodium (PAAS)
  Hydrolyzed Polymaleic Anhydride (HPMA)
  Copolymer of Maleic and Acylic Acid (MA/AA)
  Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic Acid Copolymer (AA/AMPS)
  lic Acid-2-Hydroxypropyl Acrylate Copolymer (T-225)
  Acrylic Acid/Acrylate/Phosphonic Acid/Sulfosalt Tetra-copolymer (SD-241)
  SD-613 Acrylic-acrylate-sulfosalt copolymers
  Copolymer of Phosphono and carboxylic Acid (PCA)
  SD-1100 Sodium Polyacrylate
  SD-2000 Modified Sodium Polyacrylate
  SD-3100 Carboxylate-Sulfonate-Nonion Tri-polymer
  SD-904 aqueous dispersant
  Polycarboxylic Acid Water-Reducing Agent
  Polyepoxysuccinic Acid (PESA)
  Sodium of Polyaspartic Acid (PASP)
Home -->> Products Show
Polycarboxylic Acid Water-Reducing Agent
Polycarboxylic acid water-reducing agent is a kind of concrete superplasticizer with good comprehensive properties and good perspective. It is a composite admixture of polycarboxylate copolymers and other auxiliaries. Compared with other similar products, this product is better in its performance and performance/cost ratio.

Properties:
1. Low dosage and high range of water reduction efficiency. Its water reduction efficiency can be up to 45%;
2. High slump-retaining ability. Slump loss of the concrete is less than 5% in 1h, and less than 10% in 2h.
3. High compressive strengths. It can increase the compressive strengths of concrete by 50-110% in 3 days, 40-80% in 28 days, 30-60% in 90 days;
4. Excellent workability. High ability against bleeding or segregation, low resistance and easy for pumping
5. Suitable bubble content, no bad influence on concrete modulus of elasticity, good freeze resistance;
6. Less than 0.2% alkali content,
7. Nontoxic, no formaldehyde and no pollution;
8. Stable performance, no delamination and no sedimentation for long storage period, no crystallization in low temperature.
9. High compatibility, compatibly with many cement types and mineral admixtures, particularly fit for high durability concrete and self compacting concrete.

Specification:

items

index

 Appearance

 light brown liquid

 Density (20¡æ) g/ml

 1.09¡À0.02

 Solid content %

20¡À1

 Cement paste fluidity (cement base) (mm)

 250£¨W/C=0.29£©

 pH

 6-8

 Chloride % ¡Ü

 0.02

 pH value(1% water solution)

 1.5~2.0

 Alkali (Na2O+0.658K2O)(%) ¡Ü

 0.2


Usage methods:
1. The dosage is 0.4-2.0% of the cementitious materials by weight, normally 0.4-1.2%. Do concrete mixture tests beforehand.
2. No mixture with naphthalene-base water-reducer. Compatibility tests should be conducted beforehand when mixed with other auxiliaries.
3. Slump retention is sensitive to water, water content should be strictly controlled.
4. Concrete cure should be paid attention to.

Scope of applications:
This product is suitable for pumping or normal concrete engineering of C15-C60, particularly for engineering with high durability, excellent fluidity, strong slump retention ability and excellent aesthetic appearance. For high fluidity, self compacting and as cast finish concrete, this product is a good choice.
Package and Storage:
Liquid, package in barrel, storage for one year in dry and shady place, avoiding frost.
¡¡¡¡¡¡Copyright 2010 Jiangsu Oumao Chemical Co.,Ltd. All Reseved¡¡¡¡¡¡¡¡Home¡¡ | ¡¡About Us¡¡ |¡¡ Products¡¡ | ¡¡Feedback¡¡ |¡¡ Contact Us¡¡¡¡¡¡¡¡¡¡Designed by : Zhonghuan Internet