Sodium of Polyaspartic Acid (PASP)
  Polyepoxysuccinic Acid (PESA)
  Polycarboxylic Acid Water-Reducing Agent
  SD-904 aqueous dispersant
  SD-3100 Carboxylate-Sulfonate-Nonion Tri-polymer
  SD-2000 Modified Sodium Polyacrylate
  SD-1100 Sodium Polyacrylate
  Copolymer of Phosphono and carboxylic Acid (PCA)
  SD-613 Acrylic-acrylate-sulfosalt copolymers
  Acrylic Acid/Acrylate/Phosphonic Acid/Sulfosalt Tetra-copolymer (SD-241)
  lic Acid-2-Hydroxypropyl Acrylate Copolymer (T-225)
  Acrylic Acid-2-Acrylamido-2-Methylpropane Sulfonic Acid Copolymer (AA/AMPS)
  Copolymer of Maleic and Acylic Acid (MA/AA)
  Hydrolyzed Polymaleic Anhydride (HPMA)
  Polyacrylic Acid Sodium (PAAS)
  Polyacrylic Acid (PAA)
Home -->> Products Show
Hydrolyzed Polymaleic Anhydride (HPMA)
Product Model:[CAS No.] 26099-09-02
CAS No.  26099-09-2 
Structural Formula:



Properties:
HPMA is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330”ę. HPMA has obvious threshold effect under high temperature (350”ę) and high pH£Ø8.3£©level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300”ę with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement.

Specification:

items

index

Appearance

Pale yellow to umber transparent liquid

Solid content %

48.0 min

Bromine value mg/g

80.0 max

Average molecular weight

450 min

pH(1%  solution)

2.0-3.0

Density (20”ę)g/cm3

1.18 min


Usage:
HPMA is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. HPMA has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion.

Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required.Storage for one year in room shady and dry place.

Safety Protection:
Acidity, Avoid contact with eye and skin, once contacted, flush with water.

Synonyms:
HPMA; Hydrolyzed Polymaleic Anhydride; poly(maleicacid);MALEIC ACID POLYMER;maleic acid homopolymer
””””””Copyright 2010 OuMao Chemical (HongKong) Co.,LimiTed. All Reseved””Home”” | ””About Us”” |”” Products”” | ””Feedback”” |”” Contact Us”” ”” Designed by : Zhonghuan Internet